Aquatic Macroinvertebrate Diversity in Nanda Devi Biosphere Reserve,India

Aquatic macroinvertebrate diversity in the Nanda Devi Biosphere Reserve (NDBR) was monitored for a period of twelve months (September 2000 to August 2001). All the important hydrological attributes were measured monthly for one year. Macroinvertebrates were sampled from three sites (S¹$, S²$, & S³$) of the headwater stream Dhauliganga of NDBR. The present study revealed that the velocity of the water current, hydromedian depth, turbidity and dissolved oxygen in addition to nature and size of the bottom substrates have their significant impact on benthic invertebrate diversity. The ecological relevance of the measured hydrological attributes was investigated by comparing their degree of correlation with invertebrate density and diversity. Macroinvertebrate diversity was found to be highest (3.096 ± 0.03) in winter months (November–January) and lowest (2.816 ± 0.02) in monsoon months (July–August). The high diversity of macroinvertebrates may be due to low turbidity, high water transparency, optimum water temperature, high dissolved oxygen, low water velocity and suitable composition of the bottom substrates.     

Monitoring of allethrin, deltamethrin, esbiothrin, prallethrin and transfluthrin in air during the use of household mosquito repellents

Three types of mosquito repellent [two different mosquito coils containing allethrin 0.1% w/w and transfluthrin 0.03% w/w, an aerosol sample containing a combination of two pyrethroid molecules (deltamethrin 0.02% w/w + allethrin 0.13% w/w) and two different mosquito mats containing esbiothrin 2.0% w/w and prallethrin 1.5% w/w as active ingredients] were individually subjected to use in a closed room. Air samples from the room were drawn at different time intervals (15, 30 and 45 min, and 1, 2, 4, 6 and 8 h) uniformly from three different positions in the room (top, middle and bottom) with the pyrethroid contents analysed using gas chromatography-electron capture detection (GC-ECD). Analysis of air samples showed maximum concentrations of the pyrethroid residues allethrin (0.0120 ppm), transfluthrin (0.0134 ppm), deltamethrin (0.0057 ppm), allethrin (0.080 ppm), esbiothrin (0.015 ppm) and prallethrin (0.0138 ppm) within 30-45 min of use. The drop in residue content was significant with time. At the end of a 6 h period, most of the residues had dissipated to below 0.0001 ppm. Further significant differences were observed in the residue contents tested at different points within the room. Studies were compared with the experimental results obtained when the mosquito repellents were tested with air circulation in the room.     

Human impacts on methane emission from mangrove ecosystems in India

This study deals with the emission of methane in relation to changing environmental conditions and human impact, in three mangrove ecosystems of south India. Time-varying fluxes of methane adopting the close chamber technique were used to estimate CH₄ emission from an unpolluted site (Pichavaram mangroves) and two polluted sites viz. (1) Ennore Creek mangroves (affected by fertilizer effluents and crude oil discharges) and (2) Adyar estuary mangroves (affected by the discharges of organic and industrial wastes), covering monthly and seasonal variations. The results indicate annual average CH₄ emissions of 7.4, 5.02 and 15.4 mg m⁻² h⁻¹ from the sediment–water interface of the Pichavaram, Ennore Creek and Adyar estuary respectively. Emission characteristics obtained at Pichavaram mangroves represent a natural variability with changing physico-chemical factors, whereas the emission characteristics at Ennore Creek and Adyar estuary mangroves show anthropogenic influence. Several environmental factors such as oxygen availability, organic matter, soil physical and chemical properties, in addition to human-mediated interventions have been identified as influencing emission rates in the mangrove ecosystems. Preliminary CH₄ emission estimates for the mangrove ecosystems along the Indian sub- continent and the tropical and subtropical coastline of the world by linear extrapolation based on surface area range from 0.05 to 0.37 and 2.8 to 19.25 Tg CH₄ year⁻¹ respectively. Our results also highlight the impact of human activities on future emission of methane from the mangrove ecosystems. Received: 3 March 1999 / Accepted: 14 September 1999     

Dissipation of sulfosulfuron in water - bioaccumulation of residues in fish - LC-MS/MS-ESI identification and quantification of metabolites

Dissipation study of sulfosulfuron in natural water and its bioaccumulation in fish was conducted at 25+/-2 degrees C and at two different concentration levels 1mgl(-1) and 2mgl(-1). The dissipation data in water showed the DT50 and DT90 values 67-76 and 222-253 days and followed first order kinetics. Bioaccumulation of sulfosulfuron in fish was conducted under static conditions exposing the fish at one-tenth of sub-lethal concentration 9mgl(-1) and at double the concentration 18mgl(-1), for a period of 56 days. On different occasions fish samples were collected and analyzed. A HPLC-RF method was used for the quantification of sulfosulfuron and aminopyrimidine with the limit of quantification 0.001microg ml(-1). Results showed the accumulation of residues of sulfosulfuron in fish over the concentration range 0.009-0.496microg g(-1). Both in water and fish samples, identified the presence of metabolites aminopyrimidine, desmethyl sulfosulfuron, guanidine, sulfonamide, ethyl sulfone and rearranged amine. The formations of these metabolites are confirmed by LC-MS/MS analysis. An LC-MS/MS electro spray ionization technique was used for this purpose. One of the metabolite Aminopyrimidine was identified at higher concentration levels (0.01-0.1microg ml(-1)) when compared with other metabolites. Subsequently dissipation of aminopyrimidine in water and its bioaccumulation was also studied at the concentration level 1mgl(-1) and 2mgl(-1). The calculated DT50 and DT90 values are 66-68 days and 218-226 days, respectively. This followed first order kinetics. Three hundred days after the exposure complete demineralization was observed.     

使用高分辨色质联机AUTOSPEC-ULTIMANT分析二噁英及呋喃

"二噁英"是指具有相似化学结构和生物特征的一族化合物,分别属于三大类别:多氯代二苯并二噁英(PC-DDs),多氯代二苯并呋喃(PCDFs)以及多氯联苯(PCBs).PCDDs和PCDFs无商业目的性生产,而是在大量的人类活动中产生的.自然过程也可以产生PCDDs和PCDFs.在过去的十年里,环境立法机构和企业一起致力于减少二噁英的排放.     

Aftermarket remanufacturing strategic planning decision-making framework: theory & practice

The authors of this paper offer an aftermarket, remanufacturing (or reman) decision-making framework (RDMF), developed, based on a comprehensive set of strategic factors (Subramoniam et al., 2009a) derived from an in-depth literature review and case studies. RDMF is also grounded on results from an industry survey and related theory. The survey targeted Original Equipment (OE) suppliers that are involved in automotive OE production and also provide remanufactured (or reman) parts for the aftermarket, which includes the Original Equipment Service (OES) and/or the Independent Aftermarket (IAM) business. A response rate of 42% was obtained for the survey; the respondents were business unit managers or chief engineers from 18 companies in the United States and Europe who are actively involved in the reman businesses. The survey results helped the authors of this paper to prioritize and confirm the strategic decision-making factors from previous research. The key factors considered to be important by more than 50% of the survey respondents, constituting roughly 79% of the strategic factors were then incorporated into RDMF. The RDMF will be useful for aftermarket supplier companies in general and in particular, will be useful for automotive suppliers, involved with OE and aftermarket production.     

Aero-lap polishing of poly crystalline diamond inserts using Multicon media

Increasing use of poly crystalline diamond (PCD) inserts as cutting tools and wear parts is vividly seen in automobile, aerospace, marine and precision engineering applications. The PCD inserts undergo series of manufacturing processes such as: grinding that forms the required shape and polishing that gives a fine finish. These operations are not straight forward as PCD is extremely resistant to grinding and polishing. Single crystal diamond can easily be polished by choosing a direction of easy abrasion, but polishing a PCD imposes serious difficulties as the grains are randomly oriented. Prior research on polishing of PCD inserts includes electro discharge grinding (EDG), dynamic friction polishing and grinding by a vitrified bonded diamond wheel. The surface textures of PCD produced using an EDG process often contains: micro cavities, particle pullout, micro-grooves, chipped edges, cracks and gouch marks. While applying the dynamic friction polishing method the PCD material undergoes phase transformation and hence increased polishing rate was apparently seen. However the phase transformation of PCD deteriorates the strength of the insert. Furthermore the inserts produced using the dynamic polishing method often exhibits cracks, chip off and edge damage while using as a cutting tool. Therefore, a new method “aero-lap polishing” was attempted as it applies controlled amount of impinging force by which the surface damage can be significantly reduced. The study did establish an improvement of surface finish of PCD from R_a = 0.55 μm, R_t = 4.5 μm to R_a = 0.29 μm, R_t = 1.6 μm within 15–25 min of polishing time along with significant reduction in surface defects.     

Study on the hydrogeochemical characteristics in groundwater, post- and pre-tsunami scenario, from Portnova to Pumpuhar, southeast coast of India

Natural hazards cause great damage to humankind and the surrounding ecosystem. They can cast certain indelible changes on the natural system. One such tsunami event occurred on 26 December 2004 and caused serious damage to the environment, including deterioration of groundwater quality. This study addresses the groundwater quality variation before and after the tsunami from Pumpuhar to Portnova in Tamil Nadu coast using geochemical methods. As a part of a separate Ph.D. study on the salinity of groundwater from Pondicherry to Velankanni, water quality of this region was studied with the collection of samples during November 2004, which indicated that shallow aquifers were not contaminated by sea water in certain locations. These locations were targeted for post-tsunami sample collection during the months of January, March and August 2005 from shallow aquifers. Significant physical mixing (confirmed with mixing models) within the aquifer occurred during January 2005, followed by precipitation of salts in March and complete leaching and dissolution of these salts in the post-monsoon season of August. As a result, maximum impact of tsunami water was observed in August after the onset of monsoon. Tsunami water inundated inland water bodies and topographic lows where it remained stagnant, especially in the near-shore regions. Maximum tsunami inundation occurred along the fluvial distributary channels, and it was accelerated by topography to a certain extent where the southern part of the study area has a gentler bathymetry than the north.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.